Sheffield Area Code Change |
|
| The area code for the main offices of Sukup Manufacturing Co., located in Sheffield, Iowa, has been changed to 641. | The new Sukup Sheffield phone and fax numbers are: Phone: 641-892-4222
|
Please mark your calendar and Sukup Price Pages. |
|
Sukup is manufacturing a 12" Heavy-Duty, Commercial Tube and Well Unloading System. Features of this system include:
Up to 6000 Bu/Hr. unloading capacity
Super Edge 1/4" flighting for durability and long life
12 gauge galvanized tubing
Reduction drive featuring an enclosed, self-lubricating chain drive for easy maintenance and longer life
Center sump is equipped with six roller bearings per side to allow the gate to open more easily
Intermediate sump is also equipped with six roller bearings per side
Slide Gate Assist Crank provides extra leverage to make opening the slide gates in easy task instead of a work-out
Fits beneath 15-7/8" floors.
The Sukup 12" Unloading System is available to fit bin sizes up to 120' diameter. The power head for the system is a horizontal angle ring mount.
We have professional sales videos available for most Sukup products. If you have a VCR in your office, they make a great sales tool. If you have a delighted customer, please let us know so we can get them on tape. These videos are available free of charge.
We also have a video that gives the facts about the CMC theory of natural air drying. The title of it is "Natural Air Drying - 'Just the Facts'", computer #L1365. It is also available free of charge.
18 Ga. Perforated Floors |
New Power-Ball Bearing |
| 18 Ga. (with standard .094" opening) Perforated Floors are now available. Remember, the Sukup Hawk Cut™ Floor is actually stronger than an 18 Ga. Perforated Floor, but if you have an application where Perforated Flooring is preferred, 18 Ga. is now available. | Fastir™ Stirring Machines with 3 or more satellite
carriages will have a special single-ball bearing (Power-Ball) on the top of the carriage.
Fastirs™ with 1 or 2 satellite carriages will continue to have the plastic bearing. The computer number for the new Power-Ball Bearing update kit is A8565, which includes; (1) J0144 ball transfer bearing, (1) A9506 bearing spacer, (4) J0471#10-24 x 1 1/2 screws, (4) J0985 hex nut 10-24 PLT, (4) J1191 lockwasher #10. |
If you have comments and/or suggestions on the type of information you would like to see posted on this page, please email us at afw@tiadon.com . We appreciate and value your input.