Sukup Hawk Cut Bin Floors

Sukup Makes Floor Planks Stronger

Our exclusive, patented process does not remove any steel in forming the large open area in the plank.

All openings are created in the sloped sides of the corrugation, not at the top or bottom ridge of the corrugation, which would weaken the planks.

The high arch of the planks also helps to increase strength.

Hawk Cut™ planks are smoother and easier to sweep than conventional chisel-cut floors.

Their superior design makes Hawk Cut planks ideal for the demands of higher grain depths.

Sukup Hawk Cut™ Bin Floors are twice as strong as other smooth bin floors.

The Hawk Cut™ Bin Floor (on the right in the photo below) holds twice as much weight -- without any signs of stress -- as the competitor's floor on the left.

Twice.jpg (8291 bytes)

Ask your local Sukup dealer for a sample of Sukup Hawk Cut™ Flooring and a sample of the competitor's. Put one foot on each plank and you'll feel the strength of the Hawk Cut™ Floor for yourself.

Channel-Lok

Sukup Channel-Lok floor planks feature sturdy J-shaped interlocking sides.

Channel-Lok floors will accommodate most drying and storage needs. They are also ideal for flush floor aeration applications.

Channel-Lok floors may be installed with galvanized steel Z-Post Supports or Sukup Super Supports™.

The ZipperLok™ floor allows you to easily remove the HandyLok™ plank from the center portion of the bin. With a ZipperLok™ floor, you don't have to remove half of all the floor planks on the outer edge to access the middle, as you would with a conventional floor.	Servicing unloading equipment and cleaning under the floor are a breeze with the Sukup ZipperLok™ floor. All Sukup floor planks are made of high-strength galvanized steel, which is cut to precise length with computerized accuracy.

Sukup Hawk Cut Bin Floors are twice as strong as standard smooth bin floors.