Z-Post™ Supports

University tests show that Sukup Z-Post™ Supports are up to 65% stronger than U-shaped floor supports.

Rock-solid Z-Post™ Supports are reinforced by numerous corrugations and strengthened by Z-shaped bends.

Exclusive "Z" shape gives 60% more load bearing support than typical U-shaped posts.

The diagonal portion of the Z-Post™ provides additional support across the center of the floor plank for the extra strength required for taller bins and recirculating devices.

Patented notched sides and the self-tightening spring action lock the supports in place, so they don't shift under the weight of the grain.

Z-Post™ Supports provide the most uniform airflow among post supports, since they feature the largest air opening.

Design of the Sukup Z-Posts™ also helps to distribute drying air more evenly throughout the plenum area.

Z-Post™ Supports may be used with Channel-Lok and ZipperLok™ Floors.

Z-Post™ Supports are available in 5-1/4"*, 12-1/2", 13-1/4", 15-7/8", 17" and 18-1/2" overall heights. Standard or high back flashing may be used. Flashing is totally perforated for maximum airflow and is available pre-punched for Airway™ tubes.

*5-1/4" supports do not have notched sides or air opening.

Important: Consult Sukup specifications for the number and gauge of supports required at particular grain depths. Proper installation according to Sukup instructions on smooth, level concrete is essential.

Sukup Super Supports™ are tops in airflow, strength and ease of installation.

The welded-rod frame of the Super Supports™ lets air flow freely throughout the bin plenum area.

The open design provides better heat distribution which makes for more efficient drying.

The strength of Sukup Super Supports™ makes them ideal for continuous flow drying systems. Super Supports™ can hold grain depths up to 68 feet.

Super Supports™ are also very easy to install.The unique angle iron base provides stability, so your bin floor will be rock-solid.

Super Supports™ are available in four heights; 5 1/4", 12 1/2", 13 1/4", 18 1/2".

Click here for Super Support requirements.