Sweepway Unloading Capacities |
|||
The Highest In the Industry! |
|||
| 6" | 8" | 10" | |
| Vertical | 1200 Bu./Hr. | 2400 Bu./Hr. | 3600 Bu./Hr. |
| Horizontal | 1200 Bu./Hr. | 2400 Bu./Hr. | 3800 Bu./Hr. |
| Incline | 1000 Bu.Hr. | 2000 Bu./Hr. | 3200 Bu./Hr. |
| Unload Tube Diameter |
Bin Diameter |
| 6" | 18' - 36' |
| 8" | 18' - 60' |
| 10" | 21' - 60' |
Sukup vertical augers are available in 16' or 20' heights.
Note: Throughout
this website, equipment is shown with shields removed in order to show detail. During
actual operation, all safety shields and warning decals must be in place. Sukup
Manufacturing Company offers replacements for any missing shields or safety decals on
previously purchased equipment.
| The patented reduction drive wheel is standard on all Sukup Sweepway Power Sweeps and optional on Tube and Well Systems. |
| The reduction drive wheel decreases drive wheel speed without sacrificing forward movement. The auger turns four times to every one turn of the wheel. With this lower speed, wheel slippage is reduced and wheel life is prolonged. |
| 6" | 8" | 10" | |
| Capacity (w/vertical) | 1200 bu/hr. | 2400 bu/hr. | |
| SLEEVE MOUNT | |||
| Unload Flighting: | one piece | one piece | one piece |
| Shaft and bearing dia. | 1" | 1 1/4" | 1 1/4" |
| Flighting gauge | 11 | 11 | 7 |
| Unload Tube | 14 ga. painted or 14 ga. galvanized |
14 ga. painted or 14 ga. galvanized |
12 ga. galvanized |
| ANGLE RING MOUNT | |||
| Unload Flighting | used w/ stub flight | used w/ stub flight | |
| Shaft and bearing dia. | 1" | 1-1/4" | NOT |
| Flighting gauge | 11 | 11 | AVAILABLE |
| Unload Tube | 14 ga. galvanized | 14 ga. galvanized |
| Unload Tube Dia. |
Bin Diameter |
| 6" | 14' - 44' |
| 8" | 14' - 62' |
| 10" | 16' - 62' |
